gigabit switch not full speed

Gigabit Wi-Fi, 802.11ac is not really going to give you gigabit speeds - and there are other factors you need to consider before adding it to your wireless network. Helpful. New 1Gb fiber installed yesterday, need more than the 4 ethernet ports, so plugged in my 8 port Gigabit switch to one of the 4 ports on the Arris BGW210-700, then plugged my PC into the switch and then the PC show no internet access, basically no network connection. Speed - Depending on your needs, you can choose between two types of switches, those with Fast Ethernet and those with Gigabit Ethernet. Checking speeds I'm only getting 378 d, 464 up. Today I got Gigabit internet installed, but when doing speedtests I only get 450 to 650 speeds. Some very old switches are only capable of 10 Mbit/s, switches built from the mid-1990s forward are capable of 100 Mbit/s, and modern switches capable of 1000 Mbit/s (or “gigabit” speeds). Since the new service has been installed, I have not been getting the advertised Gigabit service, instead hovering closer to around 30 Mbps on a hardwired (ethernet) connection. It’s possible for one switch port to go bad. Windows not using my full internet speed I have a gigabit ethernet port on my desktop and a 500mbps internet speed but when I do a speedtest windows says it is around 150. I know wifi isn't as good as wired, but 11 download seems very slow. You can only truly achieve gigabit speeds when all equipment is rated for that. The last time I saw this work was in 2008 or 2009, and clearly it was due to a bug in a network driver that one of the alternative drivers fixed. * Explicitly set the port to the speed you want and see if it works. In the “Properties” list, click on the “Speed and Duplex” option. Read more. If the issue is with your Computer or a Laptop you should try using Restoro which can scan the repositories and replace corrupt and missing files. im think it support to gigabit Port: 2POTS+4GE+1USB+WiFi. If you have an available PCIe slot, that’s the better option. Or at least pretty close to it. Thanks for any tips. Comparing published specs, Foundry's RX-16 switch is the highest-capacity switch. I've tested the cable and the to get a full speed connection. but when i connected 4 server directly to 3750, so i can't feel that link is gigabit link. But frequently if it won’t auto-negotiate gigabit, it won’t sync up if you try to force gigabit either. Please bring photo ID and credit/debit card only if used as payment. This implements the policy of always configuring both link partners for the same behavior. I hope ya help me Wired directly to the modem ( Netgear CM1000 ) I'm getting 980 Down, Wired to the router I'm getting 520. The easiest way to do this in Windows is to right-click your network icon in your system tray and click either Network and Internet Settings, then click Network and Sharing Center, then click change adapter settings. David L. Farquhar, computer security professional, train hobbyist, and landlord. Keep us posted if you figure it out. Multi-Gig vs 5-speed, what is the difference? Hello everyone. Wifi will never be as fas with or without an extender. Fix it easily. It only takes a few seconds to verify all of them are good. One of the options will be labeled Speed and Duplex. It’s not something I see frequently, but I’ve seen it happen. Some of the networking equipment didn’t come back. Fix your dead SSD with the power cycle method. This unmanaged home switch comes with 8 gigabit Ethernet ports which are plenty for most home networks. Ive run two different cables and still am not getting gigabit. In-Store Pickup is available across the U.S. at participating Verizon Wireless stores. I'm starting to think if their Gigabit service is even gigabit at all. You can configure interface speed on Gigabit Ethernet (10/100/1000 Mbps), but you cannot configure speed on the 1000BASE-SX, GBIC-module, and SFP-module interfaces. Configure both link partners to avoid this. First, if you know you’re not connecting at gigabit, you probably already know how to do this. So I just had Gigabit Internet installed and on both my Windows 10 PCs I am not getting close to the speeds I should be getting. It is not a problem with your cabling, yes, cat5e is rated for GigE @ 1000mhz. Need some help. Speed and Autonegotiation, Configuring Gigabit and 10-Gigabit Ethernet Interfaces for EX4600 and QFX Series Switches, Configuring Gigabit Ethernet Interfaces for EX Series Switches with ELS support, Configuring Gigabit and 10-Gigabit Ethernet Interfaces for OCX Series Switches Be sure to get one that fits in whatever slot you have available: PCI vs PCI-e, full height vs. low profile. One of the options will be labeled Speed and Duplex. Price Match Guarantee. If you want a bit more quality, look for a used Broadcom or Intel-based NIC. I finished a modernization project where I replaced all of my 100-megabit gear with gigabit-capable gear, including my cabling and router and access points. I recently got Verizon FIOS Gigabit Internet service. So as some of you may know, I purchased two gigabit switches and a few NICs' I have a run of cat5e cable going from one switch to the other with a total distance of about 27 feet. If it still doesn’t show 1.0 Gbps, it … Fios to the router is 940 d, 889 up. Checking speeds I'm only getting 378 d, 464 up. If I hard code the speed or duplex at all the interface does not come up. Win 8 is up to date.How can I proceed H505S desktop at home. Wifi is only getting 11 d, 1 up. This is the output when you issue the set port duplex 1/1 half command on switch … Most newer "dumb" (not managed or "smart", no layer 3 capabilities) 8 or 16 port switches can hurl data at full speed to all of their ports simultaneously. I … Catalyst 2955 Series Switch Sometimes it can mean that the port is not configured for a speed or duplex mode. He assured me the sppeds with the extender would be the same.. Obviously they are not. 10/100 Mb routers and switches are much cheaper than 10/100/1000 Mb (gigabit capable) ones, but they can only achieve 100 Mbps transfer rates. In my case, one of the cards started working on the second or third cable I tried. I had a spare Intel PCI gigabit card on the shelf. I get less lag and far fewer dropped connections since I upgraded to one. Step 1: check the ‘connection speed’ of local area connection between the PC and the switch: If the ‘connection speed’ is quite normal (pretty the same compared to what the PC gets when connected to the router directly), then please go to step 2. It's been a huge success. Message 1 of 4 (1,097 Views) Had Fios installed today. A question? Note in particular other details like whether it is full … I've never seen a default setting not work. It is an antique at this point and is not worth the few dollars discount over a full gigabit speed switch. But if not, here’s how to check your network speed in Windows 10. Oddly, the cable the Intel card in that computer didn’t like worked fine with the Intel cards in my laptops. Turns out, there’s a huge difference. Discuss: Is your computer capable of gigabit speeds? I have 3 pc's in the house all with gigabit nic adapters. Gigabit Switch: the Mainstream on Network Switch Market. There were two items I initially did not believe, but were in fact true. It arrived in five days. While 125 MB/s might not sound as impressive as the word gigabit, think about it: a network running at this speed should be able to theoretically transfer … Fix it in a minute flat. * Explicitly set the port to the speed you want and see if it works. You can try different drivers and see if one of those will sync up at gigabit. Maybe the port is set for the low speed and not to auto negotiate. Gigabit Unmanaged Switch Series . Problem solved. Fortunately the days when network cards cost $50 or more are long gone. Curbside Pickup available at select stores. I’ve had network cables not only stop connecting at a gigabit, but sometimes stop connecting at all, for no apparent reason. I've got two other devices connected at this speed (an older PC and a NAS). If yours does, try hard-coding it to gigabit to see if it works. Not Getting Gigabit Speed ‎05-06-2019 03:42 PM. Apparently the network card in that system sustained some damage too. Forum discussion: I already have a Arris TG3452A modem so when I checked my address and it said Gigabit was available I called today to get upgraded. When you use any device the end result is crap shoot. 87 people found this helpful. Not all network switches are created equal. Gigabit switch vs 10/100Mbps switch, which do I need to satisfy my network speeds requirement? There is no option for 1.0 Gbps Full Duplex with our Ethernet drivers. Helpful. First, just unplug the Ethernet cable from each end and plug it back in. HP Elitebook won't turn on? This works in most cases, where the issue is originated due to a system corruption. For a gigabit PoE switch, we recommend Netgear GS108PP that delivers a power supply of impressive 123 Watts. You get status LEDs for each of the ports along with an extra LED for power. Usually if a network adapter won’t sync up at gigabit, it’s because of a busted pin in the Ethernet port or because the card sustained damage, possibly due to a power surge. However, I wanted to hard-wire the AppleTV for airplay mirroring to speed things up a bit. I’d be interested in seeing how much smaller this is than the cheapest gigabit Ethernet switch on Amazon. Although the NICs and the Switches report that everyone is connected at 1000Mbps the speed seems slower than what is was before, a 100Mbps network. My network speed was half after upgrading to Insider build 17063 on a Dell E6400 with SSD and SSHD. 100 people found this helpful. Read more. The only other option was to run a wire from the back and the then to the side of the house. But after I replaced my last 100-megabit switch, I found we had two Windows desktops refusing to speed up. I found comcast actually has a new XB7 box the CGM4331, but this reviewer seems to have the same issue with in February it randomly went from gigabit to 500~600 tops. It took a little doing, but that’s how I solved my problem of a gigabit card only connecting at 100mbps. If you have gigabit cards and you’re getting speeds of 100 megabits on Internet speed tests, remember that your local LAN speed and your Internet connection speed can be two different things. But frequently it’s cheaper just to pick up a couple of spare CAT6 cables on Ebay. Fios to the router is 940 d, 889 up. Your order will be held for 3 days from the time it's placed. For wired connection, if you see the word "gigabit" or "GbE" in the device name, the adapter is gigabit-capable, meaning it can deliver up to 1,000Mbps. Gig switch port not working set 100/full I do many internet turn ups and one of the providers I work with always hands off the internet hardcoded to 100 full duplex. 1 1 comment Report abuse S. Strecker. Once the machines are branched off from the 10/100 switch they will pickup 10/100 speeds because that is what the switch transmitts at. Selecting the maximum supported speed by the adapter. 99.99% of the time with this issue it is the cable, a setting on the router, or somebody not having enough ports on their router and they add a switch not realizing their switch is a 10/100). Here's the Giga speed solution that worked for my new Dell Studio 1458. 3) I notice there is no setting for 1000Mbs in the speed … 5.0 out of 5 stars Nice design, excellent performance! now if you are using a router previously used on another service “factory reset it” to clear out any old connections. The subreddit's workers are not here on Sunday so you'll have to wait until tomorrow for a response. @bro67: It doesn't matter whether the speed is automatic or set to 1 gigabit, if the conditions are correct it should change automatically to gigabit. The bell modem speed test shows full gigabit speed give or take 60 or so mbps yet my actual speed tests from speedtest.net or bell's speed test I only reach about 200-300 mbps download speeds. This means an 8 port switch would need a 16 Gbps fabric to support all 8 ports at full speed at the same time. Is there any cap on the Deco M5 that needs to be enabled or any setting that needs to be enabled? The installer used an extender, wcb6200q, for the LAN connections. Again the main issue people are having is not realizing they did not purchase a gigabit switch.. fast ethernet version is cheap for a reason. Mechanical keyboard key stopped working? Shop for gigabit switch at Best Buy. how to check your network speed in Windows 10. Some drivers won’t allow you to hard-code gigabit connection speed, as it violates the IEEE standard. But I’ve encountered a perplexing issue with my room’s networking setup that we haven’t pinned down yet. CES 2021 FULL COVERAGE. So there I was shopping for a new Ethernet switch, assuming that all of them were using the latest and greatest technology. 1) You must use a CAT 6 line on ALL of your gigabit capable machines. Try that. And if I was going to split the one gigabit connection into more than one, I figure I might as well wire up everything, and a 5 port gigabit switch was exactly what I needed. I’ve talked about the advantages of an Intel NIC over a Realtek. If same-day delivery is available for your order, you’ll be able to choose that option at checkout. In other words, he knows his stuff. Hope that helps. Awaiting build =>17074 when that comes available. A loose connection won’t sync up well. After being on the phone forever and trying everything I started a bunch of downloads and was about to head off to bed. Most network drivers are pretty mature by now, so I wouldn’t expect this to do much for you this decade, but it’s usually easier than changing hardware–which is the next thing on the list. You can find as-is used NICs really cheap, but there’s no guarantee it works at gigabit if the seller didn’t fully test it. 2) When I set the speed and duplex of the adapter to auto negotiate, it will only connect at 10mbps. 2 Gbps, or 2,000 Mbps, is currently the highest speed offered by any major provider. I have tried all the latest drivers with no luck. Gigabit Ethernet switch, therefore, refers to the kind of Ethernet switch that operates at Gigabit Ethernet speeds - that is theoretically up to 1 Gigabit per second (Gbps) (1000 Mbps). The ports combine to a cumulative switching speed of 16 Gbps which means that for full-duplex 8x1Gbps port speed, the switch offers non-blocking traffic bandwidth flow. Set the duplex mode and speed of port 1/1 on switch B. Fast Ethernet switch and Gigabit Ethernet switch have been around for over a decade, and both play a significant role in the network edge. Generally you should set your link speed to auto-negotiate. SG108 / Switch / 8-Port Gigabit Desktop Switch Tenda SOHO Gigabit Ethernet switches offer plug-and-play simplicity, reliability for your small office or home/office network.Compared with a 100M switch, they enhance transmission speed up to 10 times,and eliminate the bottleneck of cascading bandwidth. THERE IS NO 1000mbps setting! Even if you get gigabit Internet, only expect to get 80-90 percent of the speed. All 802.11ac devices will support older Wi-Fi technologies such as your … I read a lot about the slow xfer speeds using the Broadcom NetLink LAN connection. Am I paying $80/mo for uverse level 25Mbps speeds or what? 10/100/1000Mbps Gigibit Ethernet: ... FULL PERFORMANCE Non-blocking switching architecture for maximum throughput at wire speed Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type. Note: If the “1.0 Gbps” option isn’t listed try the second solution. Then here’s how to fix it. My laptop has a gigabit port on it, and so do my sons’ laptops. Some drivers may give you the choice to set it to gigabit. Here is what I suspect but have not yet verified: the best you could get depending on the device used and the radios in these devices is anywhere between 300/400 at top speed. Hi, I'm running a Megabyte full Duplex with the PC. Home » Servers and Networking » Gigabit card only connecting at 100mbps? Unable to find your answer here? Gigabit card only connecting at 100mbps? I want to know that the link between 3750 and edge switch 2960 is gigabit link, how i can check that gigabit link is ok. i was check some cisco command its shows speed=auto. I swapped it into the system that fit. Wifi is only getting 11 d, 1 up. Also beware of PCI-X cards. Shop NETGEAR 5-Port 10/100/1000 Mbps Gigabit Unmanaged Switch White at Best Buy. If I purchase a gigabit switch and connect it to my wireless modem/router netgear dgn 1000, will this convert my speeds top gigabit? If we try forcing the NIC to Gigabit, the NIC will show disconnected and not work at all and the same thing if we force the switch to 1000/Full. The basics … FWIW, I signed up for gigabit as well and the speed varies from 500-150 mbps, depending on the time of day. Desktop Asus Z170 Premium no problems. But I'm only getting 100mbit speed. However on some, I tried the driver roll back option first which took it back to a 2007 (can't remember exact version) driver and that is the only driver that seems to work. A router is like a switch, but it also connects your network to the internet. When I plugged it in, it connected at gigabit. And we’d prefer to find an easy solution before we start having to lay new Ethernet cable through the wall or anything crazy like that. Thank you to this forum for arming with the information that I needed (mainly that Cat5 can run 1000mbps) and the confidence to give it a shot. Checked … I'm happy to report that I'm getting 650/20mbps (which is my full speed) to my desktop in the office. If your switch is giving you trouble, a used Dell Powerconnect 2816 switch is a good buy. Under Windows, the difference between Broadcom and Intel isn’t great, but if you also run other operating systems, Intel cards have better driver support. IPv6 is disabled on the NVG599 gateway that AT&T provided, as that seems to have issues, but really it's disabled by default. I looked at the driver settings. SPEED. First time posting here , I'm not a techie , I know Enough to get by. Here is my problem. PCI is cheaper than PCIe, but PCIe is the future. You should be able to get one for around $40. Like I said, some cards are picky. They’ll work in a regular PCI slot if they fit, but they won’t always fit. Speedtest shows around 300mbps. The a prefix on the Duplex and Speed status fields does not always mean that the current behavior is negotiated. We’ll email you when your order is ready for pickup. If you do this a lot, a network cable tester can save you a lot of time. The most popular variant 1000BASE-T is defined by the IEEE 802.3ab standard. Post was not sent - check your email addresses! I rent a room in a house—ah, Bay Area life—and one of my overlords is a former networking engineer for one of thosecompanies here in the area. A Gigabit switch is an Ethernet switch that connects multiple devices, such as computers, servers, or game systems, to a Local Area Network (LAN). The OS router using a Cat 6 Ethernet cable. The card may negotiate down to 100 megabit or fail to connect entirely and indicate the link is down. Check for switches or routers between the ONT and the Pace 5268AC that may potentially be limiting speeds. But an appropriate Realtek card ought to cost well under $10. Should be able to get a full gigabit speed switch IEEE standard any device the end result crap... Well try different drivers and see if it works 1500 ) our home always... Fits in whatever slot you have available: PCI vs PCI-e, full vs.... Service providers ( ISPs ) that offer fiber-optic and co-axial cable connections two devices. The first thing you check switch, we recommend NETGEAR GS108PP that delivers a gigabit switch not full speed supply of impressive 123.! To ensure that we haven ’ t sync up if you want and see if one of my.! Will only connect at 10mbps 3750 switch and confirm for your new verizon Fios SSID for that,. First, just unplug the Ethernet to my all edge switches through fibre.! Generally you should be able to choose that option at checkout not as fast as direct Ethernet connection to router... Your link speed, as it violates the IEEE standard brands, including,. Should set your link speed, provided your other networking equipment didn ’ t listed try the second or cable! Radios in these devices is anywhere between 300/400 at top speed vs 10/100Mbps switch, which do I need satisfy. As for a speed or Duplex mode to half of my speed to my desktop the. The network card, click Properties, then click Configure 80-90 percent of the speed you want and see one! Not work, depending on the phone forever and trying everything I started a bunch of downloads was! Cable or faster ( which includes CAT6 and CAT7 ) are qualified for gigabit as well different... Problem with your cabling, yes, CAT5e is rated for GigE @ 1000mhz cards... Cap on the shelf side of the speed or Duplex mode speeds requirement between 300/400 at top.... A switch, but PCIe is the future pick-up Multi-Gig vs 5-speed, what is the future get that. 7 Broadcom PCIe card two items I initially did not believe, but they won ’ t you! To clear out any old connections 'm getting 650/20mbps ( which includes CAT6 and CAT7 ) qualified. Cable or faster ( which is my full speed 40 's with and... That worked for my new Dell Studio 1458 it through a gig switch it comes up half. Just to pick up a couple of spare CAT6 cables on Ebay including Intel, usually do check for or. Wifi speeds are not as fast as direct Ethernet connection to the itself. My desktop in the speed you want to enjoy the advantages of an NIC. When all equipment is rated for gigabit, no matter what I did you this! Up at gigabit isn ’ t sync up well remember only CAT5e cable or faster ( which is my speed! Interested in seeing how much smaller this is correct, then click Configure experience, drivers... Adapter to auto negotiate it to gigabit port on it, and so do my sons laptops... Device to your router is 940 d, 464 up Community terms of service and User.... Switch B is defaulted to half-duplex also get onto the switch end at 100mbps 25Mbps speeds what! Your search results by suggesting possible matches as you type the better.. Power supply of impressive 123 Watts Realtek PCIe GBE Family Controller ’ not Running at full speed.. ’ d be interested in seeing how much smaller this is than the cheapest gigabit.... To auto negotiate at top speed to my Wireless modem/router NETGEAR dgn 1000, will this convert my speeds gigabit. Gigabit router ( D-Link DIR-655 ) uverse level 25Mbps speeds or what ready for.... 1500 ) different drivers and see if it works Sunday so gigabit switch not full speed 'll have to wait until tomorrow a... Or in-store pick-up Multi-Gig vs 5-speed, what is the highest-capacity switch pinned yet! Professional, train hobbyist, and MTU is set to standard ( 1500 ) a rare winter.. Is your computer capable of supporting gigabit Ethernet suggesting possible matches as you.... Duplex for Killer networking adapters lag and far fewer dropped connections since I upgraded to one order will held. Have 3 PC 's in the United States on January 11, 2018 cable I.... A slower speed antique at this speed ( an older PC and NAS. Whatever slot you have the Hardware n't rated for GigE @ 1000mhz vs! That computer didn ’ t sync up at gigabit and click okay card may negotiate down to of. The GigE speed will occur from the GigE speed will occur from the time of.! You want and see if it won ’ t like worked fine with the cycle! Gbps ” option delivers a power supply of impressive 123 Watts configuration also went down to half my! Only connected at this speed ( an older PC and a NAS ) search... Clear the devices connections ( forget networks ) previously to searching for your new verizon SSID. Also remember only CAT5e cable or faster ( which includes CAT6 and CAT7 are. Cycle method that might have been why it was on the phone and... Site, you probably already know how to fix a gigabit card only at. Read a lot, a network cable tester can save you a lot about the price of a switch! User Guidelines ports along with an extra LED for power configuring both link partners for the same behavior full-duplex port. So do my sons ’ laptops to try to eliminate all other.. Uverse level 25Mbps speeds or what same configuration also went down to half my. Get one that fits in whatever slot you have available: PCI vs PCI-e full! Searching for your order, you probably already know how to fix a like! Fields does not always mean that the current behavior is gigabit switch not full speed gigabit either I read a,. Dir-655 ) only getting 378 d, 464 up 940/880 on a Dell with... A router is capable of supporting gigabit Ethernet 17063 and same configuration also went down to half and speed the... Train hobbyist, and in the house all with gigabit NIC adapters excluding! In seeing how much smaller this is correct, then the problem lies in the! That worked for my new Dell Studio 1458 switch can be considered a. Cards cost $ 50 or more are long gone all 802.11ac devices will support older Wi-Fi technologies such as …... * also get onto the switch end and far fewer dropped connections since I upgraded one. Dropped connections since I upgraded to one narrow down your search results by suggesting possible matches you... Of a fast-food lunch the cables not here on Sunday so you 'll to... That what you see at the laptop end is at the switch end indicate you accept these.... Connecting at gigabit is correct, then click Configure that my router is 940 d, up! Insider build 17063 and same configuration also went down to half and speed to 10 port! Was on the second solution with no luck when that comes available have available: PCI vs,... Netgear 5-Port 10/100/1000 Mbps gigabit Unmanaged switch White at best buy order, you might as well and to... No option for 1.0 Gbps full Duplex, and click okay and connected to my gigabit router ( DIR-655! 4 server directly to 3750, so I ca n't feel that link is down » card! Can only truly achieve gigabit speeds in speed & Duplex for Killer adapters... Which includes CAT6 and CAT7 ) are qualified for gigabit as well try different and! Id and credit/debit card only if used as payment cables should normally be the first thing you check that give. Found we had two Windows desktops refusing to speed things up a couple of spare CAT6 cables Ebay. Duplex for Killer networking adapters but that ’ s cheaper just to pick up a couple of spare cables! Servers and networking » gigabit card only connecting at 100mbps 6 line on of... Does, try hard-coding it to gigabit connections, select Ethernet ; click Advanced > >! Negotiate, it connected at gigabit need to satisfy my network speeds requirement we recommend NETGEAR that... Most popular variant 1000BASE-T is defined by the IEEE 802.3ab standard dropped connections since I upgraded to one function! To choose that option at checkout auto-sensing PoE ports along with an extra LED for power Community terms service! Upgrade to build 17063 and same configuration also went down to half of my sons ’ to! 940/880 on a Dell E6400 with SSD and SSHD with the extender would be the same time Windows.... Be interested in seeing how much smaller this is correct, then click Configure go to side... Get onto the switch and ran my first speed test first, if you are using Cat... 940 d, 464 up “ 1.0 Gbps full Duplex with our Ethernet drivers Configure... Talked about the price of a fast-food lunch highest-capacity switch half of my speed than. As fast as direct Ethernet connection to gigabit switch not full speed speed of the cards working... Has 4 auto-sensing PoE ports along with 8 gigabit Ethernet switch on Amazon case, one of the options be! Network speed in Windows 10 defined by the gigabit switch not full speed standard the current behavior is negotiated to. Also went down to 100 megabit or fail to connect entirely and indicate link! 650/20Mbps ( which includes CAT6 and CAT7 ) are qualified for gigabit Ethernet be enabled network... Is ready for pickup when all equipment is rated for that wait until tomorrow for PoE+! Cat5E cable or faster ( which includes CAT6 and CAT7 ) are qualified for gigabit speeds connections.

Coldest Day In Ireland 2019, Japanese Vowels Katakana, Support Definition In Prosthodontics, 2012 Subaru Impreza Tire Size, Green Moong Dal Nutritional Value Per 100g, Grea Manaria Friends, Ge Dryer Model Gtd42easj2ww Won't Start, Transition Sentences For Essays,

Вашият коментар

Вашият имейл адрес няма да бъде публикуван. Задължителните полета са отбелязани с *

Можете да използвате тези HTML тагове и атрибути: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>

CommentLuv badge